1.575 Inch | 40 Millimeter x 3.543 Inch | 90 Millimeter x 1.437 Inch | 36.5 Millimeter PT INTERNATIONAL 5308-ZZ Angular Contact Ball BearingsProducts and services
| CAS No. | 2386-60-9 | Other Names | Butyl Sulfonyl Chloride; Butanesulfonyl chloride | MF | C4H9ClO2S |
| EINECS No. | 219-204-8 | Place of Origin | Shandong, China | Type | Agrochemical Intermediates, Pharmaceutical Intermediates |
| Purity | ≥99% | Application | It can be used for medicine and pesticide intermediates. | Appearance | light yellow oily liquid, with pungent odor |
| Melting Point | -29°C | Boiling Point | 80-81°C (9mmHg) | Density | 1.208 g/ml at 25°C |
| Refractive Index | 1.454 | Flash Point | 79°C | Moisture | ≤0.2% |
| B2 ≈ | 386 mm |
| Basic dynamic load rating C | 11164 kN |
| G | Tr 750x7 |
| G1 | 45 mm |
| B1 | 360 mm |
| Reference speed | 260 r/min |
| Calculation factor Y2 | 3.7 |
| ra max. | 6 mm |
| K | 12 mm |
| Calculation factor e | 0.27 |
We sell discountPT INTERNATIONAL Bearingonline as well as cheap machinery parts.
s:29.766 mm; Attachment bolt diameter G:12.7 mm; J max.:152.4 mm; Basic dynamic load rating C:102 kN; Limiting speed:5300 r/min; J min.:131.762 mm; H2:33.337 mm; H1:53.975 mm; L:187.325 mm; Mass bearing unit:3.65 kg;
Read More ...
Cap bolt, size:M 30x180; N1:35 mm; Lock washer:MS 3052-48; ATK:407 mm; db:280 mm; Labyrinth seal:2 x TS 60; Pa:1100 kN; J:600 mm; Lock nut:HM 3052; da:260 mm;
Read More ...
J max.:152.4 mm; S:0.794 mm; H1:53.975 mm; H2:33.337 mm; B:59.531 mm; Basic dynamic load rating C:102 kN; A:58.737 mm; Limiting speed:4500 r/min; Attachment bolt diameter G:12.7 mm; s:29.766 mm;
Read More ...
Basic Dynamic Radial Load Rating C:22500 N; Grease Speed Rating n1:8800 rpm; Fillet Radius ra:1.00 mm; d:30.000 mm; Basic Static Radial Load Rating Co:19300 N; B:26.00 mm; D:55.0000 mm; Fillet Radius rb:0.30 mm; Oil Speed Rating n2:11000 rpm;
Read More ...
Oil Speed Rating Open/Shielded n2:6000 rpm; d:90.000 mm; B:18.00 mm; Accessories:Without Accessories; Sealed Speed Rating n3:3100 rpm; D:125.0000 mm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:5000 rpm; Basic Static Radial Load Rating Co:31500 N; Basic Dynamic Radial Load Rating
Read More ...
d:110 mm; Hydraulic nut:HMV 22 E; B:21.5 mm; G:M 110x2; Mass adapter sleeve assembly:1.85 kg; B1:77 mm; d1:101.6 mm; Lock nut:KMFE 22; d3:145 mm;
Read More ...
h:96.5 mm; d:95 mm; Specific static load factor K0:45 N/mm²; a:4 mm; Permissible sliding velocity v min.:0 m/s; Coefficient of friction µ max.:0.15; Specific dynamic load factor K:25 N/mm²; α:124 °; D:115 mm; Mass bushing:2.3 kg;
Read More ...
Sealed Speed Rating n3:2000 rpm; d:100.000 mm; Accessories:Two Seals & Snap-Rin; Grease Speed Rating n1:2000 rpm; Basic Static Radial Load Rating Co:166000 N; D:180.0000 mm; Oil Speed Rating n2:3000 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:178000 N; B:60.30 mm;
Read More ...
d1:400 mm; Calculation factor Y2:6.3; K:9 mm; d3:490 mm; ra max.:3 mm; B1:168 mm; Calculation factor e:0.16; Calculation factor Y1:4.2; Basic dynamic load rating C:2083 kN; Ba min.:15 mm;
Read More ...
B:23 mm; D:90 mm; rs (min):1.1 mm; Oil:15.120 kN; Pu:105 kN; d:50 mm; Grease:124 kN; with cylindrical bore:5 000 min-1; Static (Cor):5.8 mm; Dynamic (Cr):2.5 mm;
Read More ...
Basic Static Radial Load Rating Co:6550 N; Dimension L:60.5 mm; Weight W:0.24 kg; Dimension A1:29.5 mm; Diameter N:11.5 mm; Basic Dynamic Radial Load Rating C:12700 N; Height T:37.5 mm; Height H:112.0 mm; Shaft Diameter D:20 mm; Dimension A2:15.0 mm;
Read More ...
C:112 mm; Calculation factor Y1:2.3; Mass bearing:80.2 kg; Basic dynamic load rating C:2289 kN; Thrust factor K:1.92; Design variant/feature:TDO/D; Comparative radial load rating CF:560 kN; d:380 mm; Calculation factor e:0.3; Basic static load rating C0:4500 kN;
Read More ...
Grease Speed Rating n1:7000 rpm; d:30.000 mm; Sealed Speed Rating n3:7000 rpm; Oil Speed Rating n2:9500 rpm; Fillet Radius ra:1.00 mm; D:62.0000 mm; Basic Dynamic Radial Load Rating C:28600 N; Accessories:Two Shields & Snap-R; Basic Static Radial Load Rating Co:20400 N; B:23.80 mm;
Read More ...
Dimension L:6.2500 in; Insert Bearing IB:ZMaRC; Dimension H2:0.7500 in; Basic Static Radial Load Rating Co:2520 lbf; Dimension N1:0.5469 in; Dimension A1:0.9844 in; Basic Dynamic Radial Load Rating:4380 lbf; Dimension H1:1.6875 in; Distance JMAX:5.0469 in; Shaft Diameter D:1 3/16 in;
Read More ...
Calculation factor X:0.41; Calculation factor X:0.67; Calculation factor A:0.00453; Da max.:71 mm; r1,2 min.:1.5 mm; D:80 mm; da min.:44 mm; B:21 mm; Calculation factor e:0.68; Mass bearing:0.45 kg;
Read More ...
| PT INTERNATIONAL BearingKnowledge Base |
| h | s | M | N | G | B | L | A |
| GARS18 | 96.5 mm | - | - | - | - | - | - | - |
| EA25D | - | - | - | - | - | - | - | - |
| GALRS14 | - | - | - | - | M 110x2 | 21.5 mm | - | - |
| GAXSW18 | - | - | - | - | - | - | - | - |
| GARS40 | - | - | - | - | - | - | - | - |
| GALRSW16 | - | - | - | - | - | 23.80 mm | - | - |
| GAS40 | - | - | - | - | - | - | - | - |
| GALSW5 | - | - | - | - | - | 60.30 mm | - | - |
| GIXSW14 | - | 29.766 mm | - | - | - | 59.531 mm | - | 58.737 mm |
| 5303-2RS | - | - | - | - | - | 23 mm | - | - |
| 1316K | - | 29.766 mm | - | - | - | - | 187.325 mm | - |
| 5206-2RS | - | - | - | - | - | - | - | - |
| EA35-2RS | - | - | - | - | - | 26.00 mm | - | - |
| GARSW20 | - | - | - | - | - | 18.00 mm | - | - |
| GIRS18 | - | - | - | - | - | 21 mm | - | - |
| GA16 | - | - | - | - | - | 20.00 mm | - | - |
| 1309K | - | - | - | - | - | 16.00 mm | - | - |
| GIXS10 | - | - | - | - | M 65x2 | 15 mm | - | - |
| GALRSW22 | - | - | - | - | - | - | - | - |
| 1207K | 44.45 mm | - | - | - | - | 190 mm | - | - |
| EAL25-2RS | - | - | - | - | - | 14 mm | - | - |
| EA20D-SS | - | - | - | - | - | - | - | - |
| GALS2 | - | - | - | - | - | 9 mm | - | - |
| GIS20 | - | - | - | - | - | - | - | - |
| EIL16D-SS | - | - | - | - | - | - | - | - |
| GALSW18 | - | - | - | - | - | 37.00 mm | - | - |
| EI20D-SS | - | - | - | - | - | - | - | - |
| EIL25-2RS | - | - | - | - | M 180x3 | 34 mm | - | - |
| GASW14 | - | - | 4 mm | - | - | - | - | - |
| GI18 | - | - | - | - | - | 30 mm | - | - |
| 1222K | - | - | - | - | - | 68 mm | - | - |
| 5201-2RS | - | - | - | - | - | 51.00 mm | - | - |
| GALXS16 | - | - | - | - | - | 23.00 mm | - | - |
| GALXSW8 | - | - | - | - | - | 48.00 mm | - | - |
| 1216K | - | - | - | - | - | 36 mm | - | - |
| GIS25 | - | - | - | - | - | - | - | - |
| GISW25 | - | - | - | - | - | 28 mm | - | - |
| GARSW22 | - | - | - | - | M 120x2 | 20 mm | - | - |
| GA18 | - | - | - | - | - | 84 mm | - | - |
| GAS35 | - | - | - | - | - | - | - | - |
| 2206K | - | - | - | - | - | - | - | 32 mm |
| EAL20-2RS | - | - | - | - | - | 10.00 mm | - | - |
| GIRS30 | - | - | - | - | - | 7 mm | - | - |
| EAL20D-SS | 2 mm | - | - | - | M 10x0.75 | 9 mm | - | - |
| GARS35 | - | - | - | - | - | 20.60 mm | - | - |
| GALRSW40 | - | - | - | - | - | 53 mm | - | - |
| EIL8 | - | - | - | - | - | 25.00 mm | - | - |
| GALRS25 | - | - | - | - | Tr 750x7 | - | - | - |
| EI25D-2RS | - | - | - | - | - | 24.00 mm | - | - |
| EI16D | - | - | - | - | - | - | - | - |
| EI20-2RS | - | - | - | - | - | 41.28 mm | - | - |
| 1317K | - | - | - | - | - | 56.00 mm | - | - |
| GASW35 | - | - | - | - | - | - | - | - |
| EI30D-2RS | 80.963 mm | - | - | - | - | - | - | - |
| GARSW14 | - | - | - | - | - | - | - | - |
| GALS12 | - | - | - | - | - | 25.4 mm | - | - |
| GALS3 | - | - | - | - | - | - | - | - |
| EAL10D | - | - | - | - | - | 410 mm | - | - |
| 2309K | - | - | - | - | - | - | - | - |
| GAL25 | - | 31.75 mm | - | - | - | 92.075 mm | - | 69.85 mm |
| GISW20 | - | - | - | - | - | - | - | - |
| GALS6 | - | - | - | - | - | 18.00 mm | - | - |
| GIXSW8 | - | - | - | - | - | 76 mm | - | - |
| GAXS20 | - | - | - | - | Tr 750x7 | 90 mm | - | - |
| 2215K | - | - | - | - | - | - | - | - |
| 5203-2RS | - | - | - | - | - | 46.00 mm | - | - |
| GIRSW16 | - | - | - | - | - | 38.00 mm | - | - |
| 5308-ZZ | - | - | - | - | - | 18.00 mm | - | - |
| EI30D-SS | - | - | - | - | - | - | - | - |
| GILXS6 | - | - | - | - | - | - | - | - |
| GA6 | - | - | - | - | - | - | - | - |
| GISW10 | - | - | - | - | - | - | - | - |
| 5208-2RS | - | - | - | - | - | 36.50 mm | - | - |
| EIL6D | - | - | - | - | - | 13.00 mm | - | - |
| GILXS14 | - | - | - | - | - | 184.15 mm | - | - |
| 5302-ZZ | - | - | - | - | - | - | - | 9 mm |
| GI16 | - | - | - | - | - | 23 mm | - | - |
| GIS12 | - | - | - | 17.5 mm | - | - | - | 32 mm |
| GASW8 | - | - | - | - | - | 71.40 mm | - | - |
| GILS40 | - | - | - | - | - | 56.00 mm | - | - |
| GALSW22 | - | - | - | - | - | - | - | - |
| GIXSW30 | - | - | - | - | - | - | - | - |
| EAL15D-SS | - | - | - | - | - | 8.00 mm | - | - |
| GILSW18 | - | - | - | - | - | 78.00 mm | - | - |
| 1308K | - | - | - | - | - | 12.00 mm | - | - |
| GALS10 | - | - | - | - | - | 54.00 mm | - | - |
| GALXS10 | - | - | - | - | - | 54.00 mm | - | - |
| GILRS25 | - | - | - | - | - | - | - | - |
| GARS20 | - | - | - | - | M 160x3 | 32 mm | - | - |
| 5313-ZZ | - | - | - | - | - | - | - | - |
| EA16 | 46.831 mm | - | - | - | - | - | - | - |
| GIRS5 | - | - | - | - | M 100x2 | 18 mm | - | - |
| EIL10D | - | - | - | - | - | - | - | - |
| EI40-2RS | - | - | - | - | - | - | - | - |
| GILXSW6 | - | - | - | - | - | 45 mm | - | - |
| GAS10 | - | - | - | - | - | 26 mm | - | - |
| GILRS40 | - | - | - | - | - | - | - | - |
| EIL17 | - | - | - | - | - | 39.69 mm | - | - |
| GI25 | - | - | - | - | - | 44.40 mm | - | - |
| GA22 | - | - | - | - | - | - | 749.3 mm | - |
| GIS22 | - | - | - | - | M 70x2 | - | - | - |
| 2307K | - | - | - | - | - | - | 628.65 mm | - |
| GALXS22 | - | - | - | - | - | - | - | - |
| GASW20 | - | - | - | - | - | 36 mm | - | - |
| GAS14 | - | - | - | - | - | - | - | - |
| GAXSW25 | - | - | - | - | - | 500 mm | - | - |
| EIL6 | - | - | - | - | - | - | 187.325 mm | - |
| EAL30D-2RS | - | - | - | - | - | - | - | - |
| GILS25 | 152 mm | - | - | - | - | 240 mm | - | - |
| GALSW35 | - | - | - | - | - | - | - | - |
| GIXS6 | - | - | - | - | - | 14.3 mm | - | - |
| EAL8 | - | - | - | - | - | - | - | - |
| 2205-2RS | - | - | - | - | - | - | 315 mm | - |
| GALRSW6 | - | - | - | - | - | 7.00 mm | - | - |
| 5214-ZZ | - | - | - | - | - | 9.5 mm | - | - |
| EAL17D | - | - | - | - | - | 35.00 mm | - | - |
English
TIMKEN BEARING-SINGAPORE (PTE)LTD.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
PT INTERNATIONAL EAL17D Spherical Plain Bearings - Rod Ends
2.756 Inch | 70 Millimeter x 4.921 Inch | 125 Millimeter x 1.563 Inch | 39.69 Millimeter PT INTERNATIONAL 5214-ZZ Angular Contact Ball Bearings
PT INTERNATIONAL GALRSW6 Spherical Plain Bearings - Rod Ends
PT INTERNATIONAL 2205-2RS Self Aligning Ball Bearings
PT INTERNATIONAL EAL8 Spherical Plain Bearings - Rod Ends